Plumbing Company Nearby

There are some cases where you can skip plumber repair services if you’re proficient in DIY plumbing. The DIY approach is always fascinating and an exciting experience. It’s effective in many household projects, and it brings out a lot of self-satisfaction. However, it’s a bad approach in terms of most of your house plumbing needs. Without proper training or equipment, you can easily make mistakes. And in turn, you can cause some serious damage to your house, causing you to spend way too much money along with a bad case of headache.

That’s not an exaggeration on our part because when it comes to Houston plumbing we get calls to take care of DIY plumbing mistakes more often than you think. The expensive mistakes can be avoided with some plumber repair tips. So, in order to stop you from making such expensive mistakes, we’re here to discuss the three most expensive DIY plumber repair mistakes that we’ve taken care of in homes around Houston.

Why DIY Plumbing Mistakes Are Too Expensive

Regular plumbing maintenance is a must when you have a home. That includes your water lines along with the fixtures that access your water lines. It’s easy to think that low-effort maintenance is easy to do all by yourself since that can be the most cost-effective. After all, it’s appealing to try DIY plumbing to save money. If you have the knowledge and equipment, you may end up succeeding. However, plumbing mistakes are unforgiving, and you might not be aware of them if you haven’t made mistakes before. Plumber repair mistakes can and will lead you to expensive repairs if you’re not careful, and that can easily take away your peace of mind. So, avoid these DIY plumbing mistakes and save some money in the process.

1.   Keeping The Water On While Plumbing

It’s easy to forget about a running water line while making a quick repair to a plumbing problem. That happens when an urgent plumbing problem needs immediate attention. Make sure to turn off the water before you do any sort of DIY plumbing in your home. That includes any plumbing replacements or basic plumber repairs. If you forget to turn off the water, there are a number of ways things can get very expensive and messy within moments. Some of them are:

• Your water bill can skyrocket since there’s a high chance a good amount of water can be wasted.
• Water leakage can cause flooding, and it can affect your entire house if not being careful. It can also affect electrical fixtures as well as other appliances, making them inoperable and just as dangerous.
• You’ll get overwhelmed if the damage becomes severe, so you’ll eventually need to call a professional to deal with it, which costs more money.

Among all 3 DIY plumbing mistakes, turning off your water before trying it yourself is the easiest thing you can do. It can save a ton of money from plumber repair services.

2.   Overusing Drain Cleaner

Drain cleaning products are one of the greatest ways to efficiently take care of a lot of plumbing issues like unclogging pipes and such. However, the chemical components in drain cleaning products are usually corrosive and easily damage the pipes. And if you use too much of the chemical or use it too often for all kinds of plumbing issues, it’s bound to damage your pipes severely. This, in turn, makes small leakages to your pipes to completely destroying them. Plumber repair services and pipe replacements are expensive. Drain cleaning products are not different in these terms. So, in other words, you have to use it as little as you can and switch to natural cleaners instead. Some of the more natural and safer solutions you can choose include a combination of baking soda and vinegar. You can also try other equipment like a plumber’s snake to get rid of unclogged drains and toilets.

3.   Carelessly Venting Drain Traps

Drain traps are one of the most important parts of your entire home’s plumbing system. They play a big role in keeping your home and plumbing system separated from each other and keep things safe in the process. One of the most problematic things that can get out if drain traps are not working is the release of methane gas into your house, preventing rodents from accessing your plumbing system and keeping your home healthier in the process. We have witnessed many homeowners using DIY S trap methods on their plumbing system as a plumber repair effort. An S trap is created when two separate traps form into a singular trap, which is not suitable for venting properly. The trap you should be using for proper venting is the P trap. That’s because P traps do not make things complicated by causing water in a drain trap to be siphoned out.

Seek Professional Plumbers and Save Money

No matter how good you are at DIY plumbing, you can easily make an expensive plumbing mistake, and things can get out of hand. If you want to avoid these DIY plumbing mistakes, you should seek professional plumbing professionals. Most of the time, seeking professional plumbing can be worrisome due to being a bit expensive. But DIY plumbing mistakes can be even more expensive, and they should be avoided. And it’s not just money you’ll be losing by making DIY plumbing mistakes; you’ll lose your peace of mind as well. With John Moore Services you can request our professional plumbers 24/7 with a 100% satisfaction guaranteed. Our team of professional plumbers are always here to take care of your plumber repair needs with the utmost care and respect your home deserves.

With our well-trained and experienced team of plumbers, you can always expect the following:

• Top-notch plumbing materials and service warranties
• Using drop cloths on every job to save your home appliances
• Experienced plumbing services at an affordable price range
• Fully state licensed and years of experience
• A 100% guarantee of customer satisfaction
• Taking the job seriously from start to finish and dealing with the smallest details

We take care of all kinds of plumbing needs in and around Houston, Texas. Aside from plumber repair services, we also provide specialized services in water heater replacement. Call us today, and let’s get started!