Best Plumbers in Harris County, TX

If you’re experiencing problems with your garbage disposal, don’t worry! Many common issues can be easily resolved with a few simple tools and techniques. However, it’s important to note that if you don’t have any experience or knowledge in garbage disposal repair, it may be best to seek the help of a professional plumbing company. Remember, attempting to fix plumbing issues without the proper expertise can lead to costly mistakes.

Common Garbage Disposal Problems

One of the most common problems with garbage disposals is clogs. This can occur when food particles or other debris get stuck in the disposal unit. To fix a clogged garbage disposal, start by turning off the power to the unit. Next, use an Allen wrench to clear any jams in the disposal. If the clog persists, you can try using a plunger to dislodge the blockage.

A leaking garbage disposal can be a frustrating issue to deal with. To fix a leaking garbage disposal, you first need to identify the source of the leak. It could be coming from a loose connection or a worn-out gasket. Tighten any loose connections and replace the gasket if necessary. If the leak persists, it’s best to consult a professional plumber.

If your garbage disposal is making a humming noise but not turning on, it indicates a problem with the motor. Start by clearing any jams in the disposal using an Allen wrench. If that doesn’t work, try resetting the motor by pressing the reset button on the bottom of the unit. If the problem persists, you may need to replace the motor.

If your garbage disposal isn’t turning on at all, there are a few steps you can take to troubleshoot the issue. First, check the power connection to ensure it is properly connected. Next, reset the circuit breaker if it’s tripped. If the disposal still will not turn on, you may need to replace the switch.

Garbage Disposal Repair Tools

Before attempting any repairs on your garbage disposal, it’s important to have the right tools on hand. Here are a few essential tools you may need:

• Plunger: A plunger can be useful for clearing clogs in your garbage disposal. It creates suction that helps dislodge the blockage, allowing water and debris to flow freely again.
• An Allen wrench: Also known as a hex key, is an essential tool for dislodging jams in your garbage disposal. Most disposals come with a special wrench that fits into the reset button on the bottom of the unit.
• Pipe Wrench: A pipe wrench may be necessary to tighten loose connections or remove stubborn pipes. It provides a strong grip and leverage, making it easier to work with tight plumbing fittings.
• Bucket: Having a bucket or container nearby can be handy when working on your garbage disposal. It allows you to collect any water or debris that may come out during the repair process, keeping your workspace clean.

Safety Precautions

When working with garbage disposals or any plumbing equipment, it’s important to prioritize safety. Before attempting any repairs, make sure to turn off the power to the garbage disposal. This helps prevent accidental injuries and electrical shocks.

Wearing protective gear, such as gloves and safety goggles, can protect you from any sharp objects or debris that may be present in the garbage disposal. When using tools like wrenches or plungers, be careful not to injure yourself on any sharp objects or edges. Always exercise caution and keep your hands away from blades or moving parts.

Steps to Fix a Clogged Garbage Disposal

If your garbage disposal is clogged, follow these steps to fix the issue:

1. Turn off the power: Before attempting any repairs, make sure to turn off the power to the garbage disposal. This can usually be done by flipping the switch on the circuit breaker.
2. Clear the jam with an Allen wrench: Use the Allen wrench provided with your garbage disposal or a 1/4-inch Allen wrench to locate the reset button on the bottom of the unit. Insert the wrench and turn it back and forth to dislodge any jams.
3. Use a plunger: If the clog persists, try using a plunger. Fill the sink with enough water to cover the rubber part of the plunger. Place the plunger over the drain and push down firmly, then pull up quickly. Repeat this motion a few times to create suction and dislodge the clog.

Steps to Fix a Leaking Garbage Disposal

If your garbage disposal is leaking, follow these steps to fix the issue:

1. Identify the Source of the Leak: Inspect your garbage disposal to determine where the leak is coming from. It could be a loose connection or a worn-out gasket.
2. Tighten Loose Connections: If the leak is coming from a loose connection, use a pipe wrench to tighten it. Make sure not to overtighten, as this can cause damage to the fittings.
3. Replace the Gasket: If the leak is coming from the gasket, you may need to replace it. Remove the old gasket and clean the area thoroughly. Install the new gasket according to the manufacturer’s instructions.

Steps to Fix a Humming Garbage Disposal

If your garbage disposal is humming but not turning on, follow these steps to fix the issue:

1. Clearing the Jam: Use the Allen wrench provided with your garbage disposal or a 1/4-inch Allen wrench to locate the reset button on the bottom of the unit. Insert the wrench and turn it back and forth to dislodge any jams.
2. Resetting the Motor: If the disposal still won’t turn on, press the reset button on the bottom of the unit. This will reset the motor and may resolve the issue.
3. Replacing the Motor: If the humming persists and the disposal won’t turn on, you may need to replace the motor. This is a more complex repair that may require the help of a professional plumber.

Steps to Fix a Garbage Disposal That Won’t Turn On

If your garbage disposal won’t turn on at all, follow these steps to troubleshoot the issue:

1. Check the Power Connection Ensure that the power connection to the garbage disposal is secure and properly connected. If it’s loose, tighten it. If the connection is damaged, you may need to replace it.
2. Reset the Circuit Breaker If the power connection is secure but the disposal still won’t turn on, check the circuit breaker. If it’s tripped, reset it and see if the disposal starts working again.
3. Replace the Switch: If the disposal still won’t turn on, the switch may be faulty. Replace the switch with a new one according to the manufacturer’s instructions.

Garbage disposal repair is essential in all households. Nobody wants to live near a garbage dump after all! However, you might want to let the experts take care of the issues for you.

When it comes to professional plumbing services, John Moore Services is a trusted name in the industry. We offer a wide range of installation and repair options for all your plumbing needs. Whether you’re dealing with a clogged garbage disposal or need a complete kitchen sink installation, our team of skilled plumbers can handle it all. Contact us at now for the best assistance.